1. User and Admin Passwords
Jump to:
No content available.
| Admin | User | |||
Device | Registered | Login | Password | Login | Password |
W60,W70 | yes | admin | 73Kxxxx37 | 8746 | 8746 |
When the handset LCD screen prompts Unregistered!, long press
on the base station till the registration LED flashes.Press the Reg soft key on the handset to register quickly.
on the base station till the registration LED flashes.No content available.
| Admin | User | |||
Device | Registered | Login | Password | Login | Password |
W90,W80 | no | admin | 73Kxxxx37 | 8746 | 8746 |
The following shows the LED status after the DM/Base connects to the power and network:
| Base Mode Option | Role | LAN LED | ROLE LED | DECT LED |
| 1 | Base | Green | Green | Off |
| 2 | DM | Green | Orange | Off |
Please be aware of updating DM and Base to minimum firmware 103.80.0.90. For more information please see here:
support.yealink.com/en/portal/docDetail?documentCode=a0c1acd0387740ea
Registering Base Station via Web User Interface:
Access the web user interface of the DM.
Go to BaseStation -> BaseStationRegistration.
Click Add Base Station.
Registering Handsets via NFON Admin Portal:
Go to Elements -> Devices.
Select Your DM.
Click Add Handset.
Enter IPUI and save (find IPUI and packaging or handset menu).
Press Reg or Register on handset.
Press paging key for about 1 minute.
Power off your DM/Base and restart.
Go to OK -> Settings -> System Settings -> Handset Reset.
The phone prompts you whether to reset the handset.
Confirm the action.